Best Clear Dashboard Car Phone Mount by Grip
Two products in this set are actually complete mounts. The rest are the clear adhesive pads that keep a suction base stuck. Here's how to tell which one you need.
The best clear dashboard car phone mount for most people is the Pormkig Sticky Adhesive Dashboard Mounting Pad, a 3.15-inch transparent disc that anchors a suction-cup base to a dash that a bare cup can't grip. If you don't already own a holder and need the whole rig in one box, the VANMASS Version 6.0 is the pick instead. Here's the fast shortlist: the Pormkig 5-pack for existing bases, the VANMASS 6.0 for a complete holder, and the AZXYI 6-pack when you want spares to trim.
Pads or a full mount: which are you shopping for?
Before anything else, sort what you actually need. Three of these five products are not phone holders at all. They're clear adhesive pads. The pad sticks to your dash, and your suction-cup base sticks to the pad.
That distinction decides everything. A best clear dashboard car phone mount search returns both kinds because Amazon reads "clear" and "dashboard" and stops thinking. The listings mix pads and holders under the same words.
Two products here are complete mounts you can use out of the box:
- VANMASS Version 6.0 — a full suction-cup holder with adjustable feet
- VANMASS Version 5.0 — an earlier full holder, sized for 4-7 inch phones
Three products are adhesive pads only:
- Pormkig 3.15-inch — 5 transparent discs, 80mm
- Pormkig 2.76-inch — 4 transparent discs, 70mm
- AZXYI 6-pack — 6 transparent discs, 80mm
Read the count. A pack of 4, 5 or 6 is pads. A count of 1 is a holder. Get that wrong and you'll own five stickers and no cradle.
Best clear dashboard car phone mount at a glance
| Pick | Type | Clear part | Price |
|---|---|---|---|
| Best overall Pormkig Sticky Adhesive Dashboard Mounting Pad |
Adhesive pads (5-pack, 80mm) |
Transparent gel | Check Price |
| Best premium VANMASS Version 6.0 |
Full holder (count of 1) |
Clear suction cup | Check Price |
| Best for beginners VANMASS Version 5.0 |
Full holder (4-7 in) |
Clear suction cup | Check Price |
| Best budget pick Pormkig 2.76-inch Sticky Pad |
Adhesive pads (4-pack, 70mm) |
Crystal-clear gel | Check Price |
| Best for small spaces AZXYI Very High Bond Pads |
Adhesive pads (6-pack, 80mm) |
Transparent | Check Price |
How I sorted five listings into two buckets
I lined up the specifications side by side and split the set by what you actually receive. The buyer profile drove the ranking, not the price position.
The pads went into one group. All three are transparent, all three ship in a multi-count pack, and all three claim you can trim them to shape. The Pormkig 5-pack led that group because it pairs the largest count-to-size balance with a stated 1-year warranty and sells faster than the other two pads here.
The holders went into the other group. Both are VANMASS, both use a suction cup, and both target 4-7 inch phones. The Version 6.0 sells far quicker than anything else in the whole set, which is why it takes the premium slot over its older sibling.
Here's the logic in order:
- Match the product to what the buyer is missing: a base, or a whole holder.
- Within pads, reward count, size fit and a published warranty.
- Within holders, reward the newer version and broader mounting options.
- Break ties with which item buyers reach for most in its category.
That's it. No item was cut, because five is a workable shortlist. I just refused to pretend a sticker and a cradle solve the same problem.
1. Pormkig Sticky Adhesive Dashboard Mounting Pad — Best overall
The Pormkig 5-pack is the clear pad most people need, because a suction cup that won't stick to a textured dash will stick to this.

Best for: keeping an existing suction-cup base stuck to a textured dash Skip it if: you don't already own a phone holder
This is the pick when you already have a mount and the cup keeps popping off. Each disc measures 3.15 inches (80mm) and just 0.04 inches thick, so it disappears against the dash. You get 5 in the pack, which means four spare tries if your first placement is off.
Pormkig says the transparent gel holds a suction base "more firmly on the windshield" and that you can cut each disc to the shape you want. Attribute those as the maker's claims, not measured grip. What I can verify from the data: it's the second-cheapest here, it carries a stated 1-year warranty, and it's the pad buyers here reach for most often.
The trade-off is honest. This is not a holder. If your dash is bare and you have nothing to stick to the pad, this box leaves you stranded. It also beats the 70mm Pormkig only on size and count, so a smaller base doesn't need it.
Pros:
- Largest usable disc at 3.15 in / 80mm
- 5 discs give spare attempts
- Stated 1-year warranty
- Trimmable to shape, per the maker
- Barely 0.04 in thick against the dash
Cons:
- Not a phone holder, only the sticky base
- Overkill for narrow 70mm bases
- Grip claims are the maker's, not tested
- One seller lists it
2. VANMASS Version 6.0 — Best premium
The VANMASS 6.0 is the full clear dashboard car phone mount to buy when you want a complete holder in one box, not a pad.

Best for: buyers who want a full holder, not a pad, in one box Skip it if: you want published dimensions before buying
This is a whole mount, and that's the reason to pay up here. VANMASS calls it the Version 6.0 "Ultimate" model with adjustable feet that open from a stated 0 to 0.78 inches, wide and deep enough for phones in the 4-7 inch range. The suction cup is the clear component, so the "clear" in your search points at the grip, not a separate sticker.
It's the most expensive pick in this set, and it sells faster than everything else here by a wide margin. Two sellers stock it. VANMASS quotes a suction figure in its bullet copy, which I'll leave as marketing rather than repeat as fact.
The gap against its older sibling is real but narrow: the 6.0 gains adjustable feet and a longer hook clip claim. The catch is thin published data. There are no listed dimensions and no stated warranty, so you're buying on the version number more than on a spec sheet.
Pros:
- Complete holder, no separate pad needed
- Adjustable feet, 0 to 0.78 in per maker
- Fits 4-7 in phones
- Sells quickest of the whole set
- Two sellers list it
Cons:
- Most expensive pick here
- No published dimensions or weight
- No stated warranty in the listing
- Suction figure is a marketing claim
3. VANMASS Version 5.0 — Best for beginners
The VANMASS 5.0 is the easy first holder, with vent, dash and windshield options and a full spec line.

Best for: first-time buyers who want vent, dash and windshield options Skip it if: your phone is wider than 7 inches
If you've never fitted a car mount, start here. The 5.0 is the earlier VANMASS holder, and unlike the 6.0 it publishes real numbers: it weighs 0.7 lb, measures 3.15 x 5.91 x 3.94 inches, and grips phones from 4 to 7 inches. That spec line matters when you're guessing whether it fits your cupholder or glovebox.
VANMASS says this "Version 5.0" moves between dashboard, windshield and vent, and that the suction cup grew to 2.8 inches for a claimed 44% grip boost. Read those as the maker's words. What's solid is the material call: PC and ABS, ink black, a single unit.
It sits in the pricier half of this set without the newer feet or the faster sales the 6.0 shows. So it's the beginner's holder precisely because it tells you more before you buy, not because it does more. The main limit is the 7-inch ceiling, which rules out the largest phones in cases.
Pros:
- Full published dimensions and 0.7 lb weight
- Vent, dash and windshield mounting
- Fits 4-7 in phones
- PC and ABS construction
- Complete holder out of the box
Cons:
- Pricier than three picks here
- Older version than the 6.0
- 7-inch ceiling excludes big phones in cases
- Grip percentage is a maker claim
4. Pormkig 2.76-inch Sticky Pad — Best budget pick
The 70mm Pormkig is the cheapest way to re-stick a smaller base, and it's built for magnetic dash mounts.

Best for: magnetic dash mounts and tight round bases Skip it if: your base is wider than 70mm
This is the lowest-priced pick in the set and the one to grab when your base is small. Each pad is 2.76 inches (70mm) across and 0.06 inches thick, and you get 4 in the pack. Pormkig aims it at magnetic dash mounts as well as suction cups, so it's the natural spare for a magnetic holder.
Pormkig describes a "crystal clear soft gel" with an upgraded peel-off tab and a cleaning kit in the box, and says it's heat-resistant under high temperatures. Those are the maker's claims. The verifiable facts: 70mm, 4-count, model DSAT70MM, and a stated 1-year warranty.
Against the 80mm Pormkig, you're trading size and one fewer disc for a lower price. That's the whole story. If your suction base is 3 inches wide, this pad is too small and you'll want the 5-pack instead. It also sells slower than the other two pads here, though that changes nothing about how it sticks.
Pros:
- Cheapest pick in the set
- Built for magnetic and suction bases
- Cleaning kit included, per maker
- Stated 1-year warranty
- Compact 70mm fits tight bases
Cons:
- Smallest discs, may underfit wide bases
- Only 4 in the pack
- Slowest-selling pad here
- Heat claims are the maker's
5. AZXYI Very High Bond Pads — Best for small spaces
The AZXYI 6-pack gives you the most discs to trim, which is what you want when the space on your dash is awkward.

Best for: buyers who want spare pads to trim to size Skip it if: you can't wait a full day before mounting
When your dash has a curved or cramped spot, count matters more than anything, because you'll waste a few pads trimming. AZXYI ships 6 discs at 80mm, the most in this set, and each is 0.04 inches thick. The pack weighs just 1.13 oz. It's a 2026 release, model AZXYI-6DR, with a stated warranty.
AZXYI says the pads suit suction-cup and windshield bases, that you can cut them to any size, and that you should clean the surface and wait 24 hours before use. That last instruction is the real catch: this is not a stick-and-drive pad by the maker's own guidance.
It lands mid-priced here, between the two Pormkig pads. The trade against the 5-pack is subtle. You gain one extra disc and lose nothing on size, but you accept the day-long cure time and a slightly higher price for the same 80mm footprint. For a fiddly install spot, the extra disc earns its keep.
Pros:
- Most discs in the set at 6
- Full 80mm size
- Lightest pack at 1.13 oz
- 2026 model with stated warranty
- Trimmable to any shape, per maker
Cons:
- Maker advises a 24-hour wait before use
- Pricier than both Pormkig pads
- One seller lists it
- Not a phone holder, pads only
How clear is clear, and does it stay clear?
Clarity is the whole selling point in this category, so it's worth being precise. Every pad here is described as transparent or crystal-clear gel, and both VANMASS holders use a clear suction cup rather than a tinted one. That's why the word "clear" pulls all five into the same search.
What the listings can't promise is how the clear part ages. None of these products publishes a UV rating, a yellowing test, or a temperature log I can quote. Pormkig's 70mm pad claims heat resistance, and the 5.0 lists a temperature-tested material, but those are the makers' words, not verified numbers.
A few things to watch for yourself:
- Gel pads pick up dust on the sticky face, which reads as cloudy. Rinse and air-dry to restore clarity.
- A clear suction cup shows dirt more than a black one, so a smudged windshield shows through.
- Trimming a pad with scissors leaves a rough edge that catches light. Cut slow.
The honest read: "clear" describes how these ship, not a guaranteed forever state. Treat it as a starting condition.
When a different pick wins
The overall pick assumes you already own a suction base. Change that assumption and the answer flips. Here are the concrete switches.
- If you have no holder at all, the Pormkig pad is useless to you and the VANMASS 6.0 becomes the buy, since it's a complete cradle.
- If your suction base is 70mm or smaller, skip the 80mm 5-pack and take the Pormkig 2.76-inch pads, which are sized for it and cost the least.
- If you're mounting in a curved or tight spot where you'll trim and retry, the AZXYI 6-pack's extra disc count wins over the 5-pack.
- If you want a full spec sheet before you commit, the VANMASS 5.0 beats the 6.0, because it publishes dimensions and weight the newer model omits.
The cutoff between pads and holders is simple: do you own a working suction base right now? Yes means a pad, and the 80mm Pormkig is your default. No means a holder, and the VANMASS 6.0 is your default. Everything else is a size or budget adjustment inside those two lanes.
What the listings leave out
Even the fuller listings here hold back data you'd want. Knowing the gaps keeps you from overpaying for a spec that isn't published.
- No adhesion force in numbers. The pads all claim strong or heavy-duty bonding. None states a pull rating, so grip claims stay claims.
- The 6.0 hides its dimensions. Its older sibling lists size and weight; the newer premium pick doesn't. You're trusting the version bump.
- Warranty terms are thin. Three pads state a 1-year warranty, but the holders' listings don't spell one out. Don't assume coverage that isn't written.
- Cure time varies. AZXYI tells you to wait 24 hours. The Pormkig pads don't state a wait, which doesn't mean there isn't one.
Match the missing field to your decision. If long-term hold worries you, favour the pads with a stated warranty. If you need to mount today, note AZXYI's wait and plan around it.
The verdict
If you already own a suction-cup holder that won't stay put, the Pormkig Sticky Adhesive Dashboard Mounting Pad is the buy. It's the 80mm, 5-disc pad with a stated 1-year warranty, it's the second-cheapest pick here, and it's the pad buyers in this category reach for most. That combination of size, spare count and coverage is why it takes the top slot over the other two pads.
If you own no holder at all, the calculation changes completely, and the VANMASS Version 6.0 wins. It's a complete cradle with adjustable feet claimed from 0 to 0.78 inches, it fits 4-7 inch phones, and it sells faster than anything else in this set. Its exact advantage over the Pormkig is that it's a whole mount, not a sticky base you attach to something you already have.
The cutoff is one question: do you have a working suction base today? Yes points you to the Pormkig pad. No points you to the VANMASS 6.0. The VANMASS 5.0 slots in for beginners who want published dimensions first, and the two remaining pads cover smaller bases and tighter install spots.
FAQ
Is a clear dashboard car phone mount pad worth buying over a full holder?
A clear dashboard car phone mount pad is worth it only if you already own a suction-cup base. The pad, like the Pormkig 5-pack at 80mm, restores grip on a textured dash for far less than a new holder. If you have no cradle at all, spend on the VANMASS 6.0 instead. Match the product to what you're missing.
Which is worth it, the Pormkig 80mm or the AZXYI 6-pack?
Which is worth it depends on your install spot. The Pormkig 80mm 5-pack is the cheaper default and sells fastest of the pads here. The AZXYI 6-pack costs more but gives one extra disc and a 2026 model date. Pick AZXYI when you expect to trim and retry in a tight space, and accept its 24-hour cure wait.
Will these pads fit my suction base size?
These pads fit if their diameter matches or exceeds your base. The Pormkig 5-pack and AZXYI 6-pack are 80mm, the largest here, so they suit wide 3-inch cups. The Pormkig 2.76-inch pad is 70mm, sized for smaller or magnetic mounts. Measure your base first, then match. All three claim you can trim them down if needed.
VANMASS 6.0 versus 5.0, which should I get?
The VANMASS 6.0 versus the 5.0 comes down to data versus features. The 6.0 adds adjustable feet claimed from 0 to 0.78 inches and sells fastest in this set, but hides its dimensions. The 5.0 publishes 0.7 lb weight and 3.15 x 5.91 x 3.94 inches. Beginners who want a full spec sheet should take the 5.0.
What is the biggest mistake buying a clear dashboard mount?
The biggest mistake is buying a pack of pads when you needed a whole holder. A count of 4, 5 or 6 means adhesive discs only, with no cradle. A count of 1 means a complete mount. Read the count and the product type before you order, or you'll end up with stickers and nothing to stick a phone into.
Start by answering one question at your car: does a suction cup already hold your phone, or nothing does? If a base is there and slipping, grab the Pormkig 80mm 5-pack, peel a disc, and give it a firm press on a cleaned dash. If your dash is bare, the VANMASS 6.0 is the safer default because it ships as a full cradle, not a part you bolt onto gear you don't own. The clear pad wins for most people simply because most people already have the holder and just need it to stay put.
Last updated: September 14, 2026. Product availability re-checked.
This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.